DeWalt DCS520 54v XR Cordless FlexVolt Plunge Saw and Guide Rails Kit

The DeWalt DCS520 FlexVolt XR Plunge Saw has a brushless, heavy-duty motor which offers the same power as a mains tool and makes it perfect for plunging into a wide variety of materials whilst offering consistent speed and an accurate cut under heavy loads.

It features an anti-kickback system which allows the user to go about cutting tasks without fear of injury or damage to the workpiece. It will also achieve 90% dust extraction when fitted to an extractor thanks to the closed guard, making it a perfect choice for mobile plunge cutting on site.

Specifications
• No Load Speed: 2,500-4,200rpm
• Blade Diameter: 165mm
• Blade Bore: 20mm
• Bevel Capacity: 47°
• Max. Depth of Cut at 90°: 59mm
• Max. Depth of Cut at 90° (with guide rails): 55mm
• Max. Depth of Cut at 45°: 44mm
• Max. Depth of Cut at 45° (with guide rails): 40mm
• Weight: 4.7kg
• Length: 303mm
• Height: 265mm
• Hand/Arm Vibration: 1.1m/s²
• Uncertainty K 1 (Vibration): 1.5m/s²
• Sound Pressure: 82.2dB(A)
• Sound Pressure Uncertainty: 2.9dB(A)
• Sound Power: 93.2dB(A)
• Sound Power Uncertainty: 2.9dB(A)

Features and Benefits
• 54v XR FlexVolt system giving the power of the cord, without the cord
• Parallel plunge allows the user to maintain a smooth and constant hand position while cutting
• A 42 tooth blade gives a fine and accurate finish with very little breakout in laminates
• Rail adjustment allows the saw to be adjusted accurately to the rail
• Variable speed allows the correct speed to be set for different types of materials
• The enclosed guard gives a 90% dust extraction capability
• 55mm depth of cut allows the trimming and sizing of most common door sizes
• Anti kickback function: stops the saw from moving backwards along the rail and helps stop the saw from climbing out of the work piece when making plunge cuts