Blue Spot Plumbing Tools
Loading...
End of content
Error - No more pages to load
Blue Spot Plumbing Tools at MyToolShed.co.uk
Blue Spot plumbing tools cover the everyday jobs of pipework, from measuring and cutting to preparing pipe ends before fitting. They suit professional plumbers, heating installers and maintenance engineers, and they are equally practical for DIYers tackling a bathroom refit or a radiator swap.
The range currently centres on Pipe Cutting & Preparing Tools, which help you get clean, accurate cuts and well-prepared pipe ends so joints seal properly the first time.
Blue Spot Plumbing Tools Features and Benefits
- Clean, square cuts: accurate cutting action leaves pipe ends ready for compression, push-fit or solder fittings, which reduces the risk of leaks and call-backs.
- Compact, portable designs: tools that fit in a tool bag or pouch make them easy to use under sinks, behind boilers and in tight floor voids.
- Pipe preparation: deburring and finishing tools remove sharp edges and swarf, protecting olives and O-rings and helping fittings seat correctly.
- Hand-operated simplicity: manual tools need no power, so they work on any site, including those without a 240v supply.
- Practical value: straightforward, hard-working tools suit trade use and occasional jobs alike.
Popular Blue Spot Plumbing Tools
Pipe Cutting & Preparing Tools
This is the core of the Blue Spot plumbing selection. Pipe cutters and related preparation tools are used on copper and other common pipe materials in domestic hot and cold water, central heating and general plumbing installations. Choose them for first-fix and second-fix work, repairs and alterations where tidy, accurate pipe ends matter.
Frequently Asked Questions
How do I choose the right pipe cutter?
Start with the pipe material and diameter you work with most. Check that the cutter's capacity covers your sizes, for example 15mm and 22mm for typical domestic installations. If you often work in confined spaces, a compact cutter is usually easier to turn around the pipe.
How should I prepare a pipe after cutting?
Remove the internal and external burrs with a deburring tool, then wipe away any swarf. Check the cut is square and the end is clean before fitting. This helps compression fittings and solder joints seal properly and prevents debris entering the system.