Blue Spot Holesaws & Arbors

Blue Spot Holesaws & Arbors at MyToolShed.co.uk

Blue Spot holesaws and arbors cover the cutting jobs that come up on most sites and in most workshops: cutting clean, round openings for pipes, cables, downlights, locks and fittings. Browse the Holesaw Sets and Holesaws categories to find the right way to cut through timber, plasterboard, sheet metal and more.

Whether you are a plumber running waste pipes, an electrician fitting recessed lights or a joiner fitting door hardware, you can pick up a single holesaw for a specific size or a set that covers a range of diameters.

Blue Spot Holesaws & Arbors Features and Benefits

• Multiple diameters in one set: a set means you are ready for different pipe, cable and fitting sizes without a return trip to the van or shop.
• Toothed cutting edge: the saw teeth cut a clean-edged hole, which reduces the amount of finishing you need to do afterwards.
• Arbor and pilot drill system: the arbor holds the saw on your drill, while the centre pilot bit keeps the cut on its mark from the first turn.
• Individual holesaws: replace a single worn or missing size without buying a whole set again.
• Drill compatibility: arbors are designed to be used with standard drills, so you can use equipment you already own, whether corded 240v or cordless.

Popular Blue Spot Holesaws & Arbors

Holesaw Sets

Holesaw sets bundle several saw sizes with an arbor, usually in a carry case. They suit electricians, plumbers, kitchen fitters and general maintenance work where hole sizes vary from job to job.

Holesaws

Single holesaws are ideal when you need one particular diameter or want to replace a worn saw. They suit repeat jobs, such as cutting the same size hole for downlights or pipework.

Frequently Asked Questions

Should I buy a holesaw set or a single holesaw?

Choose a set if your work involves a variety of hole sizes, as it gives you flexibility and an arbor in one case. Choose a single holesaw if you only need one diameter or are replacing a worn saw.

How do I get a clean cut with a holesaw?

Fit the saw securely to the arbor, mark the centre of the hole and start at a low speed so the pilot bit can locate. Let the teeth do the work with steady pressure, and clear the waste from the saw regularly to keep the cut smooth. Where possible, cut through from one side until the pilot bit breaks through, then finish from the other side to reduce splintering.