Festool CSC SYS 50 EBI Brushless Precison Table Saw

The Festool CSC SYS 50 EBI is a cordless table saw designed for tradespeople who need precision cutting on site without sacrificing portability. Compact enough to fit inside a Systainer, it can be transported with one hand and set up wherever the job demands.

Despite its compact form, this table saw delivers cutting performance comparable to mains-powered machines. The brushless EC-TEC motor runs at up to 6,800 rpm and draws from a 2x18V dual battery system, providing the power and torque needed for rip cuts up to 48 mm deep and 280 mm wide, cross-cuts up to 450 mm wide, and angled cuts from -2° to 47°.

What sets this saw apart is its digital control system. Height and angle adjustments are made via electric stepper motors, accurate to within 0.1 mm, with settings displayed parallax-free on a digital screen. Up to four blade positions can be saved, making it straightforward to reproduce consistent cuts across a project — ideal for joiners, kitchen fitters, and flooring contractors working with high-tolerance materials.

The ball bearing-mounted slide ensures judder-free travel for both parallel and mitre cuts, while the robust parallel side fence clamps securely with a single lever. A chip collection bag allows dust-free working even without an extractor, though the 27 mm extraction port makes it fully compatible with Festool cordless dust extractors. The tool also integrates with the full Festool Systainer ecosystem and bott vehicle racking, keeping site organisation straightforward.

Features and Benefits:
• Compact Systainer format: Fits into a Systainer for one-handed transport and stackable storage on site or in the van
• Digital precision: Electric stepper motors adjust height and angle to 0.1 mm accuracy via a parallax-free digital display
• Save and recall: Up to four blade positions can be stored, ensuring repeatable cuts across a job
• Powerful cordless performance: Brushless EC-TEC motor at up to 6,800 rpm with 2x18V dual battery system
• Versatile cutting: Rip cuts to 280 mm wide, cross-cuts to 450 mm, and angled cuts from -2° to 47°
• Angled undercut capability: Blade tilts to -10° (at restricted cutting depth) for undercutting infill panels
• Judder-free slide: Ball bearing-mounted slide for accurate parallel and mitre cuts
• Single-lever parallel fence: Robust side fence with double clamp for precise, repeatable rip cutting
• Dust management: Chip collection bag included; compatible with Festool cordless extractors via 27 mm port
• Systainer compatible: Integrates with the full Festool Systainer system and bott vehicle equipment
• Three-year warranty: Festool's three-year warranty covers battery packs and chargers as well as the tool

Specifications:
Battery voltage (rated voltage): 2 x 18 V
Idle engine speed: 4,500 – 6,800 min?¹
Saw blade location hole: 20 mm
Inclination angle: -10° to +47°
Cutting height at 0°: 0 – 48 mm
Cutting height at 45°: 0 – 34 mm
Cutting height at -10°: 21 – 32 mm
Mitre angle: 0 – 70°
Parallel cut width: 280 mm
Tabletop height: 228 mm
Dimensions (L x W x H): 512 x 396 x 296 mm
Dust extraction connection diameter: 27 mm
Drive type: Battery
Product weight (without accessories): 15.00 kg
Transport weight (incl. accessories): 23.5 kg
Sound power level LWA: 98 dB(A)
Sound pressure level LpA: 85 dB(A)
Noise uncertainty K: 3 dB
Standards: EN 62841-3-1
Contents
• Wide mitre range: Angle stop covers mitre angles from -70° to +70°

Contents:
WOOD FINE CUT HW 168 x 1.8 x 20 WD42 circular saw blade
parallel side fence
workpiece holder
preset profile setting rail
chip collection bag
splitting wedge for concealed cuts
splitting wedge with protective hood
hex key
WAF 6