Einhell Wood Drill Bits
Loading...
End of content
Error - No more pages to load
Einhell Wood Drill Bits at MyToolShed.co.uk
Einhell wood drill bits are made for drilling clean, accurate holes in timber, plywood, MDF and chipboard. Whether you are hanging doors, building furniture or fitting kitchens, the right bit makes the job quicker and leaves a neater finish. They suit cordless drills and drill drivers, including those on Einhell's Power X-Change battery platform.
This category is split into two types of bit: Brad Point Drill Bits for precise, general-purpose drilling, and Forstner Drill Bits for flat-bottomed holes and larger diameters. Browse both to find the right bit for your project.
Einhell Wood Drill Bits Features and Benefits
- Centre point tip: Locates the bit exactly where you mark it and stops it wandering at the start of the hole, so positioning is accurate.
- Sharp cutting spurs: Score the wood fibres before the main cutting edge removes the waste, reducing splintering and tear-out on the face of the workpiece.
- Hardened steel construction: Holds an edge through repeated use in softwood, hardwood and sheet materials.
- Spiral flutes: Clear waste material as you drill, which reduces heat build-up and helps prevent clogging in deeper holes.
- Wide range of diameters: Lets you match the bit to everything from small pilot holes to larger openings for hinges and fittings.
Popular Einhell Wood Drill Bits
Brad Point Drill Bits
Brad point bits are the go-to choice for accurate joinery and carpentry. The sharp point keeps the bit on target, and the spurs give crisp hole edges. They are ideal for dowel joints, shelf pin holes, cabinet making and general woodworking with a cordless drill or drill press.
Forstner Drill Bits
Forstner bits cut clean, flat-bottomed holes and work well for larger diameters. They are a favourite for concealed hinge recesses, locks and furniture hardware, and for any job where a blind hole needs a smooth, level base. Use them in a drill press where possible, or at a steady, controlled speed in a hand-held drill.
Frequently Asked Questions
Should I choose a brad point or Forstner bit?
Choose a brad point bit for accurate, general-purpose holes, such as dowels and through-holes. Choose a Forstner bit when you need a flat-bottomed hole, a large diameter, or a recess for a hinge or lock.
How do I avoid splintering when drilling wood?
Mark the position clearly, start at a moderate speed and keep the drill square to the surface. Clamp the workpiece and place a scrap piece of timber underneath so the bit exits cleanly. Clear waste regularly on deeper holes to keep the bit cutting freely.
