Rust Oleum Hard Hat Galva Plus Metal Spray Paint

The Rust-Oleum Hard Hat Galva Plus is a fast-drying zinc and aluminium aerosol coating, formulated for the touch-up and repair of galvanised steel surfaces in light industrial and corrosive environments.

Based on an epoxy ester resin, this 500ml spray contains pure zinc and aluminium as active pigment, providing a silver metallic, flat finish that closely matches the appearance of galvanised steel. It is designed for single-coat application on small or localised areas where the original galvanising has been damaged, cut, or worn.

Drying times are practical for on-site use — touch-dry in as little as 15 minutes at 20°C, handleable within an hour, and offering heat resistance up to 150°C under dry conditions. Recoating should be carried out within 2 hours or left for a minimum of 48 hours before applying an additional coat.

Features and Benefits:
• Fast-drying formula — touch-dry in 15 minutes at 20°C
• Contains pure zinc and aluminium pigment for effective galvanising touch-up
• Epoxy ester resin base provides durability in corrosive environments
• Heat resistant up to 150°C (dry heat)
• Ready-to-use 500ml aerosol — no mixing or specialist equipment required
• Suitable for single-coat application in light industrial exposures

Specifications:
Size: 500ml
Colour: Silver metallic
Appearance: Flat
Propellant: Dimethyl ether
Recommended dry film thickness: 25 µm
Recommended wet film thickness: 100 µm
VOC content: 655 g/l
Drying to touch: 15 minutes (at 20°C / 50% r.h.)
Drying to handle: 60 minutes (at 20°C / 50% r.h.)
Recoat window: Within 2 hours or after 48 hours
Full hardness: 7 days
Heat resistance: 150°C (dry heat)
Theoretical coverage: 1.7 m² per can at 25 µm dry