Chemical Resin Accessories
Pay in 3 interest-free payments on purchases from £30-2000 with 
. Learn more.
Loading...
End of content
Error - No more pages to load
About Chemical Resin Accessories
Chemical resin accessories are the essential tools and components required for professional application of chemical anchor systems in construction and fixings work. This range includes dispensing guns for various cartridge sizes (300ml, 380ml, 410ml, and 600ml formats), static mixing nozzles that ensure proper blending of two-part resin systems, and hole preparation equipment such as cleaning brushes and blow pumps. These accessories are critical for achieving strong, reliable bonded anchor installations in concrete, masonry, and other substrates that meet structural requirements and UK building regulations.
MyToolShed.co.uk stocks a comprehensive selection of chemical resin accessories from Rawlplug, a leading manufacturer of professional fixing systems. From manual and pneumatic resin guns with varying thrust ratios to specialist mixing nozzles designed for specific resin formulations, these accessories ensure accurate dispensing, thorough component mixing, and proper hole preparation—all fundamental to achieving specified load values and structural integrity in demanding applications.
Applications
- Structural Engineers & Contractors: Safety-critical fixings in commercial construction, structural reinforcement, and seismic retrofitting projects
- General Builders & Bricklayers: Installing handrails, brackets, and structural fixings into concrete and masonry on residential and commercial sites
- Shopfitters & Retail Installers: Securing shelving systems, display units, and fixtures requiring strong, reliable anchoring in retail environments
- Facilities Maintenance Teams: Repairing and installing fixings for HVAC equipment, safety barriers, and building infrastructure
- Steel Erectors & Fabricators: Fixing steel structures to concrete foundations and post-installed reinforcement connections
- Fencing & Gate Installers: Securing heavy gate posts and commercial fencing systems into concrete bases
- Serious DIY Enthusiasts: Substantial home improvement projects requiring professional-grade anchoring solutions
Choosing The Right Chemical Resin Accessories
Cartridge Compatibility: Ensure your dispenser gun matches your cartridge size. Standard coaxial cartridges (300ml, 380ml, 410ml) require different gun cradles, whilst 600ml foil pack systems need completely different mechanisms. Always verify compatibility before purchasing.
Thrust Ratio Requirements: Higher viscosity resins, particularly those for overhead applications or cold weather use, require guns with higher thrust ratios (18:1 or 26:1). Standard polyester resins typically work well with 10:1 or 15:1 ratios. Check the resin manufacturer's recommendations for optimal dispensing performance.
Hole Preparation Equipment: Proper hole cleaning is absolutely critical for achieving specified load values. Wire brushes matched to your drill bit diameter remove loose material, whilst blow pumps clear dust from the hole depth. Both are essential—dust and debris can reduce bond strength by 50% or more.
Mixing Nozzle Specifications: Different resin systems require specific mixing nozzles. Using incorrect nozzles results in poor component mixing and compromised bond strength. Stock appropriate nozzles for your resin brand—Rawlplug systems use different nozzle designs for various product ranges. Remember that mixing nozzles are single-use items, so calculate your project requirements accordingly.
Safety Information
Chemical resins contain reactive components requiring careful handling. Always wear appropriate PPE including safety glasses and chemical-resistant gloves, and ensure adequate ventilation. Skin contact with uncured resin may cause sensitisation—if contact occurs, wash immediately with soap and water, never use solvents. Mixing nozzles can become pressurised during use; never point them towards yourself or others.
When drilling holes for resin anchors, be aware of HSE regulations regarding respirable crystalline silica dust. Use on-tool extraction where possible, and ensure blow pumps discharge away from your breathing zone and other workers.
Frequently Asked Questions
Can I reuse mixing nozzles to save money?
No, mixing nozzles are designed for single use only. Once resin has passed through a nozzle, it begins curing inside the helical mixing elements. Attempting to reuse nozzles will result in poor mixing, blockages, and compromised bond strength that could lead to fixing failure.
Will any resin gun work with any cartridge?
No, cartridge formats vary significantly. Standard coaxial cartridges require different gun cradles to accommodate their physical dimensions, whilst foil pack systems need completely different gun mechanisms. MyToolShed.co.uk stocks Rawlplug guns designed for specific cartridge formats—always verify compatibility before purchasing.
How important is hole cleaning really?
Absolutely critical. Dust, loose material, and drilling debris prevent proper resin adhesion to hole walls, potentially reducing bond strength by 50% or more. Professional installations require brushing to remove loose particles followed by blowing or vacuuming to clear dust—both steps are essential, not optional.