Trend Jigsaw Blades
Loading...
End of content
Error - No more pages to load
Trend Jigsaw Blades at MyToolShed.co.uk
Trend Jigsaw Blades at MyToolShed.co.uk are wood-cutting blades for joiners, carpenters, kitchen fitters and serious DIYers. Each pack is built around a specific job, from fine finishing cuts in veneered boards to fast, rough cuts in softwood and downcut work on laminate worktops.
Whether you need a clean top face or quick progress through thick timber, choosing the right tooth profile makes the difference. The Trend blades below are listed by cutting style so you can match the blade to the material.
Trend Jigsaw Blades Features and Benefits
- Upcut tooth profiles: Blades such as the T101B draw material upwards, keeping the top face clean and tear-free on veneers and laminates.
- Downcut option: The T101BR cuts on the downstroke, protecting the visible surface of laminate worktops when you cut from the top.
- Fine and coarse tooth pitch: A 10 TPI fine cut gives smooth finishes, while coarse blades like the T111C and T144D remove material faster.
- Crossground tapered back: Reduces friction in the cut, helping the blade run more freely and follow your line.
- Practical blade length: The T101B is 100mm overall with a 75mm cut length, which suits most common board and timber thicknesses.
- Multi-pack supply: The T101B comes in a pack of five, so you have spares on hand for the next job.
Popular Trend Jigsaw Blades
Trend T101B Straight Fine Cut Wood
A 10 TPI upcut blade for clean, smooth finishes on veneered sheet materials, laminates and visible faces.
Trend T101BR Downcut for Worktops
Designed for cutting worktops with the decorative face upwards, helping prevent chipping on the surface.
Trend T111C Fast Coarse Cut Wood
A coarse-tooth blade for quick cutting where speed matters more than finish.
Trend T119B Straight Cut Wood and Plastics
A versatile choice if you switch between timber and plastic sheet.
Trend T144D Fast Wood Cut
Another fast-cutting option for rapid stock removal in timber.
Frequently Asked Questions
Which Trend jigsaw blade gives the cleanest finish?
The Trend T101B fine cut blade is the best choice for a clean top face. Its 10 TPI upcut profile suits veneered boards and laminates. For worktops cut from the decorative side, the T101BR downcut blade protects the surface instead.
When should I use a coarse blade instead of a fine one?
Choose a coarse blade like the T111C or T144D when speed is the priority, such as roughing out shapes or cutting through thicker timber where edge finish is less critical. Use a fine blade when appearance matters or the material is prone to splintering.
