Sealey Inserts

Shop Christmas Gifts
Choosing a sort option reloads the results in the new order.

Showing 8 results

Sealey SM3025CS1 Lathe Turning Tool Tips Set

£28.95

in stock

Sealey 7 Piece Indexable 10mm Turning Tool Set

£146.95

in stock

Sealey 5 Piece Indexable 8mm Turning Tool Set

£50.95

in stock

Sealey 7 Piece Indexable 8mm Turning Tool Set

£126.95

in stock

Sealey SM3025CS6 Lathe Turning Tool Tips Set

£63.95

in stock

Sealey SM3025CS5 Lathe Turning Tool Tips Set

£60.95

in stock

Sealey 5 Piece Indexable 10mm Turning Tool Set

£55.95

in stock

Sealey SM3025CS2 Lathe Turning Tool Tips Set

£28.95

in stock

Choosing a sort option reloads the results in the new order.

Showing 8 results

Loading...

End of content

Error - No more pages to load

Sealey Inserts at MyToolShed.co.uk

Sealey inserts and indexable turning tools are made for lathe work, where accurate cutting and quick tip changes keep jobs moving. The selection covers indexable turning tool sets with carbide tips and replacement lathe turning tool tip sets, suited to workshop, hobby and light industrial use.

Whether you are setting up a new lathe or restocking worn tips, you can pick a set that matches your shank size and the steel you cut.

Sealey Inserts Features and Benefits

  • Indexable carbide tips: hard-wearing edges cut steel cleanly, and you can rotate or replace a tip without regrinding the tool.
  • Standard 8mm and 10mm shanks: these fit most hobby and light industrial lathes, so there is no need for special tool holders.
  • Multi-tool sets: several tool profiles in one set cover turning, facing and profiling without buying tools separately.
  • Replacement tip sets: fresh cutting edges restore finish quality and save you replacing the whole tool.

Popular Sealey Inserts

Indexable Turning Tool Sets

The Sealey 5 Piece and 7 Piece Indexable Turning Tool Sets come with 8mm or 10mm shanks. Choose the larger set for extra tool profiles, or the smaller one for core turning tasks.

Lathe Turning Tool Tips Sets

The Sealey SM3025CS1, SM3025CS2, SM3025CS5 and SM3025CS6 tip sets are replacements for worn cutting edges, helping you keep consistent results on steel workpieces.

Frequently Asked Questions

How do I choose between 8mm and 10mm turning tool sets?

Check the maximum shank size your lathe's tool post accepts. A 10mm shank is more rigid for heavier cuts, while 8mm suits smaller lathes.

When should I index or replace a tip?

Rotate or replace the tip when you see a poorer surface finish, chatter or visible edge wear. Fitting a fresh edge is quicker and cheaper than replacing the whole tool.

↑ TOP

Your Basket

£0.00 - 0 items